适用于无线体域网的动态口令认证协议

无线体域网中传输的是与生命高度相关的敏感数据，身份认证是信息安全保护的第一道防线。现有的基于人体生物信息的身份认证方案存在信息难提取、偶然性大和误差性大的问题，基于传统密码学的认证方案需较大计算资源和能量消耗，并不适用于无线体域网环境。为此，在动态口令和非对称加密机制基础上，提出一种适用于无线体域网的动态口令双向认证轻量协议，并对其进行形式化分析。通过理论证明、SVO逻辑推理及SPIN模型检测得出：该协议满足双向认证，且能够抵御重放攻击、伪装攻击、拒绝服务器攻击和口令离线攻击，具有较高安全性。     

改进的多层感知机在客户流失预测中的应用

针对在传统的客户流失预测数据预处理中，使用one-hot编码处理离散属性导致数据维度增加及数据过于稀疏的问题，提出了两种基于多层感知机的改进后的客户流失预测模型。其主要思想是分别使用堆叠自编码器和实体嵌入两种方法对多层感知机进行改进，通过将离散属性的高维编码数据向低维空间映射，有效地减少了one-hot编码产生的稀疏数据，增加了离散属性值之间的关联度。在对两份公开的数据集进行交叉验证后的实验结果表明，改进后的模型既有效地提高了预测的准确度，又维持了传统多层感知机模型在并行化计算方面的优势。     

基于碳纳米管的超级电容器聚吡咯电极复合方法

For the defect that the mechanical properties of polypyrrole supercapacitors decrease with charge and discharge cycles, and the cycle stability is poor, a compound method of polypyrrole electrode for supercapacitors based on multi-walled carbon nanotubes is proposed. The structure of the formed polypyrrole coated multi-walled carbon nanotubes effectively increase the specific surface area of the electrode material, the utilization rate of the active material and the electrical conductivity, improve the rapid charge and discharge performance of the electrode material, and greatly improve cyclic stability of polypyrrole. The composite electrode materi- al of polypyrrole and functionalized multi-walled carbon nanotubes for supercapacitors is prepared by pulse current deposition meth- od. It is scanned at a scanning rate of 1000mV?s -1 in a 3mol?L -1 potassium chloride electrolyte, after 100,000-cycle, the capacity on- ly declines by 16%.     

Discrete‐time sector based hands‐off control for nonlinear system

This article presents a hands‐off control design for discrete‐time nonlinear system with a special type of nonlinear sector termed as “discrete‐time sector.” The design method to define the boundary of a discrete‐time sector is done with control‐Lyapunov function. The generalization of nonlinear system is viewed in the perspective of a comparison function. By means of a proposed sector, a switching control is designed such that no control action is experienced inside the sector thus, saving unnecessary control efforts. However, to study the robustness for discrete‐time system, a hands‐off control is modified to ensure the monotonic decrease in the energy of the system. Finally, the proposed approach is verified with the simulation results.     

基于RGV轨导柔性线环境离散型零件生产过程管理与实践

为满足航空中小型结构件快速交付的需要,以提升航空中小型结构件制造高精度、自动化和高效率为目标,通过对航空中小型结构件加工现状进行梳理分析,搭建柔性生产线自动排程与调度平台,实现柔性生产线工艺设计与准备过程管理,简化工艺准备流程,推进快换工装的应用并进行自动化程序管理;在柔性生产线加工运行过程中采用可视化管理方法,推动自动化环境下加工过程资源保障集中化管理。最终使该管理方法在某项目中进行成功实践,取得了良好的经济效益。     

整体壁板离散填料滚弯成形有限元模拟

具有一定曲率外形的铝合金整体壁板属于典型的多筋零部件,传统弯曲成形工艺成形困难,容易产生多种缺陷。提出了离散填料辅助滚弯成形整体2A12T4铝合金壁板滚弯工艺,并通过实验与整体填料滚变成形进行了对比,同时采用有限元模拟技术,探究了离散填料辅助整体壁板滚弯成形中的影响因素。研究结果表明:填料数量、上下垫板厚度等因素对成形性能影响较大,填料在3~6块时成形稳定,可以有效地避免筋条屈曲与失稳;随垫板厚度增加,壁板表面圆弧更加光滑、连续,但是回弹性增强;上下垫板分别在10~20 mm厚度时,综合性能较好。通过离散填料辅助滚弯技术可以成形出质量较高的整体壁板。     

基于Faster R-CNN的颜色导向火焰检测

基于深度特征的目标检测方法Faster R-CNN在火焰检测任务上存在检测效率低的问题,因此提出了基于颜色引导的抛锚策略。该策略设计火焰颜色模型来限制锚的生成,即利用火焰颜色约束锚的生成区域,从而减少了初始锚的数量,提升了计算效率。为了进一步提高网络的计算效率,将区域生成网络中的卷积层替换成掩膜卷积。为了验证所提方法的检测效果,采用BoWFire和Corsician数据集进行验证。实验结果表明,该方法实际检测速度相较于原Faster R-CNN提高了10.1%,BoWFire上该方法的火焰检测F值为0.87,Corsician上该方法的准确度可达99.33%。所提方法可以提高火焰检测的效率,并能够准确检测图像中的火焰。     

双离心机法线加速度计动态校准中三参数余弦算法实现及应用

在双离心机的线加速度计动态校准中,三参数余弦算法贯穿在幅频特性、相频特性以及幅值线性度的整个测试中。本文详细描述了三参数余弦算法的概念和推导过程,以及在双离心机线加速度计动态校准数据处理过程中三参数余弦算法的程序实现;介绍了在幅频特性和相频特性中关于采集点的选取方式,降低由于采集点选择方式不同对数据拟合精度造成的影响。选取某型线加速度计为例,利用双离心机进行动态校准,对采集得到的数据点进行曲线拟合并得到测试结果,验证了所编写的三参数余弦算法程序的可行性。     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

基于CFD-DEM方法的净化器流场模拟与结构优化

针对空气净化器能耗高的问题，使用离散元方法(DEM)在吸附滤网中建立随机堆积柱形活性炭模型，采用计算流体力学(CFD)方法对空气净化器内部流场进行数值模拟，在模拟与实验验证的基础上，考察了压降最小、流场最均匀的吸附滤网结构。结果表明，空气净化器压降主要发生在轴向，活性炭吸附滤网中回流、沟流现象严重，流体阻力是其他两种滤网的3倍。边数对多边形填充孔结构吸附滤网内压降与流场均匀性无影响，当孔结构改为圆形时，压降减小约52 Pa，节能18.4%(49 W)；当孔直径由8 mm增至12 mm，压降减小约48 Pa，节能19.4%(45 W)；滤网间距对空气净化器压降无影响，圆形、小孔径的吸附滤网内流场最均匀。